Models 40, 57, and 77 - Power Supply

Common Power

Remove a 57 / 77 PSU

Remove a 57 / 77 PSU

   This is a little more involved than the 76 PSU, but still simple (after stripping 54+ 9577 systems, it's all too clear!).
   Open the case. Remove the rear bezel by prying the two catches between the corner of the case and the PSU. Undo the catch on the inside of the rear of the case (between the PSU and the riser card). The entire rear bezel will now pivot on two tabs that are on the side opposite the PSU.

   Now remove the four screws that hold the PSU in the case. Unplug P1 and P2. Unplug any drives that are attached to the PSU. Move the cables towards the front.
   Now remember that PS/2s are bloodthirsty. With care, push the PSU out the rear of the case. I have used my thumbs on the upper rear of the case and my fingers pulling the top of the PSU rearward.

Content created and/or collected by:
Louis F. Ohland, Peter H. Wendt, David L. Beem, William R. Walsh, Tatsuo Sunagawa, Tomáš Slavotínek, Jim Shorney, Tim N. Clarke, Kevin Bowling, and many others.

Ardent Tool of Capitalism is maintained by Tomáš Slavotínek.
Last update: 08 May 2024 - Changelog | About | Legal & Contact