RT Installation Verification

The Installation Verification program compares the installed features list created by the Loadable POST programs to the configuration record on the fixed disk.

  The Installation Verification program is run during installation and setup to check all the adapters and options after shipment. The program assumes the Diagnostic Routines were run after the last change to the system unit. Running the Diagnostic Routines updates the configuration record on the fixed disk.

To Run the Installation Verification: 

1. Press ENTER after reading the DIAGNOSTIC OPERATING INSTRUCTIONS. 

2. Choose Installation Verification on the FUNCTION SELECTION menu. 

3. If the installed features list and configuration record do not match, follow the displayed instructions.

Content created and/or collected by:
Louis F. Ohland, Peter H. Wendt, David L. Beem, William R. Walsh, Tatsuo Sunagawa, Tomáš Slavotínek, Jim Shorney, Tim N. Clarke, Kevin Bowling, and many others.

Ardent Tool of Capitalism is maintained by Tomáš Slavotínek.
Last update: 24 Mar 2024 - Changelog | About | Legal & Contact