From lori!cmcl2!yale!cs.utexas.edu!uunet!ibmpa!dolphin.tcspa.ibm.com!mlewis Wed Mar 14 10:36:10 EST 1990 Article 2273 of comp.sys.ibm.pc.rt: Path: lori!cmcl2!yale!cs.utexas.edu!uunet!ibmpa!dolphin.tcspa.ibm.com!mlewis >From: mlewis@dolphin.tcspa.ibm.com (Mark S. Lewis) Newsgroups: comp.sys.ibm.pc.rt Subject: IBM 8514 source code (part 1 of 6) for X11 Release 4 Keywords: V1.32_kit.1 8514 X11R4 Message-ID: <4471@ibmpa.UUCP> Date: 12 Mar 90 23:15:11 GMT Sender: news@ibmpa.UUCP Reply-To: mlewis@ibmsupt.UUCP Followup-To: comp.sys.ibm.pc.rt Organization: IBM AWD, Palo Alto Lines: 1650 Subject: IBM 8514 source code (part 1 of 6) for X11 Release 4 Index: ../mit/server/ddx/ibm/ibm8514 Description: IBM has decided to provide X11 source code for the 8514 display adapter. This is the same code used to build the object files included in the X11 Release 4 distribution. This code supports servers for both AIX and IBM/4.3 on their respective platforms. V1.32_kit.1 59,103 Bytes V1.32_kit.2 61,796 Bytes V1.32_kit.3 60,982 Bytes V1.32_kit.4 62,729 Bytes V1.32_kit.5 54,871 Bytes V1.32_kit.6 29,170 Bytes Installation: This code is provided in a 6-part shell archive. Before you install it, you should save your current code. You should save the Imakefile in the ibm server directory. You also should save the entire ibm8514 directory by moving and remaking it. cd ../mit/server/ddx/ibm cp Imakefile Imakefile.orig mv ibm8514 ibm8514.orig mkdir ibm8514 Next, edit this header from each part, and feed the rest to /bin/sh. Proceed to make the server as instructed in the X11 release notes. sh < V1.32_kit.1 ---- 1620 lines deleted to save space, since we don't care about the 8514 ----