FT//e (Pentium Panther II) Motherboard (Rev 1.4.2)

RAM Configuration
Ethernet Options
Disk Drives
Switch Settings
Additional Options
Rear Panel
CMOS Discharge


 



RAM Configuration

Pentium Based Processor Board

256MB Maximum. Eight 36 bit SIMM sockets. Minimum system configuration = 16MB. 32MB SIMMs are industry standard and are not the same as those used in the XEN-LS II/PC.
Memory is configured as 128 bit wide, thus SIMMs must be installed in two groups of four, as follows:

MM1, 3, 5, 7
MM2, 4, 6, 8

e.g. 16MB = 4 x 4MB SIMMs



Hard Drives

MB Make Model Type Part Number
240 Quantum LPS 240S SCSI TF50162
380 IBM 0661 SCSI TE48235
515 Maxtor MXT-540SL SCSI TF50191
540 Quantum LPS 540 S SCSI
1,000 IBM 0662 S12 SCSI XB52689
1,200 Maxtor MXT-1240S SCSI TE50199
2,000 IBM 0664 M1H SCSI TG51270
Tape
150 Archive Viper150 SCSI SU52600
525 Archive Viper525 SCSI SU52601
1.3GB Archive Python SCSI TE49468
2-8GB Archive DDS DAT SCSI SU52593
Floppy
2 MB Sony MP-F17W-0A 3.5"
1.2Mb Panasonic JU-475-4 5.25"
CD-ROM
Sony CDU561 SCSI SU52602


Ethernet Options

3Com 32 bit bus master Ethernet card, thin/thick wire (3C527B) XB50379
3Com 16 bit Ethernet card, thin/thick wire (3C523B) XB48125
3Com 16 bit Ethernet card, UTP/thick wire (3C523B-TP) XB48127
3Com 32 bit Ethernet card, thin/thick wire (3C529) XB51624
3Com 32 bit Ethernet card, UTP/thick wire (3C529-TP) XB51625
IBM Token Ring 4/16Mb/s LAN card (25F9528) XB49546


Switch Settings

I/O Board

SW1

Switch 2nd Floppy Device
5.25"
3.5"

SW2 Misc. Settings (I/O Board)

Switch

On

Off

1

Cache Enable

Cache Disable

2

Flash Enable

Flash Disable

3

N/A

4

N/A

5

N/A

6

FTs

FTe

SW3 CMOS RAM Clear

Position  
Clear CMOS
Normal Use

SW4 Number of Drives

Switch Position On
Dual Drives
Single Drive

SW5 Select 4MB Primary Floppy Drive

Position  
2MB Floppy
4MB Floppy


Additional Options

Apricot LOC Technology security.



Rear Panel



CMOS Discharge

To discharge CMOS use SW3 on the I/O board.



9595 Main Page