Readme of Archive [E16LATE.EXE] If you are running Windows* for Workgroups 3.11 and during setup of the adapter, you changed the I/O Channel Ready setting to Early, it will cause both SOFTSET and Windows to hang after their initial startup screens. When the EtherExpress board is in "early" mode it cannot communicate in a 16-bit slot in most machines. LATE.EXE can reprogram the EEPROM to IO Channel Ready 'Late' mode so it can communicate in that 16-bit slot. The LATE utility operates by obtaining the current I/O PORT setting from the PROTOCOL.INI file and reprograms the EEPROM. Follow the steps below: a. Remove 'DEVICE=