Top Content APPENDIX A. DATA SHEET

Network Interface
Standard or Draft
Fiber cabling: ANSI X3.T9.5
UTP5 or S/UTP cabling: TP-PMD
Bus Interface available for ISA, EISA, MCA, PCI
LAN Controller AMD Supernet Chipset
RAM 128 KB static CMOS
Power Consumption @ 5 V max SAS approx. 2A.; DAS 2,65A
@ 12 V max 50 mA.
FLASH Memory 128 KB (16 Pages à 8 KB)
Dimensions EISA: 275 mm x 127 mm (11 " x 5.08 " approx.)
ISA: 339 mm x 107 mm (13.8" x 4.28")
MCA: 292 mm x 88,3 mm (11.5" x 3.48")
PCI: 126 mm x 186 mm (4.98" x 7.4")
Temperature Range Storage: -20°C...+60°C / Operation: +10°C...+40°C
Rel. Humidity (non-condensing) Storage: 10%...90% / Operation: 30%...80%

Top Content APPENDIX B. INTERFACE PINOUTS

Top Chapter RJ-45 RECEPTACLE

Unshielded Twisted Pair Port Pinouts (Port Type A, B, M and S)

Figure 14. RJ-45
Figure 14. RJ-45 Pinout

The TP-PMD UTP standard uses RJ-45 connectors and receptacles.
The table below summarizes the port pinouts.

RJ-45 Contact Signal
1 Transmit (Tx+)
2 Transmit (Tx-)
7 Receive (Rx+)
8 Receive (Rx-)

Note: Category 5 UTP cables for FDDI require 1<->7 and 2<->8 crossovers.

Top Chapter OPTICAL BYPASS SWITCH RECEPTACLE

Figure 15. Optical Bypass Interface
Figure 15. Optical Bypass Interface