;*************************************************************************** ;* Copyright (C) 1991 by Old River Software * ;* This Program contains proprietary and confidential information. All * ;* rights reserved except as may be permitted by prior written consent. * ;*************************************************************************** AdapterId 00301h AdapterName "SCSI-2 Host Adapter" NumBytes 4 NamedItem Prompt "BIOS Disk Driver Enable" choice "Enable Driver" pos[0]=1XXXXXXXb choice "Disable Driver" pos[0]=0XXXXXXXb Help "The BIOS Disk Driver may be disabled if desired. The BIOS Disk Driver will map up to two SCSI drives in the system. If you do not want this to happen, you should disable the BIOS Disk Driver." NamedItem Prompt "BIOS Boot Drive Order" choice "SCSI drives at end" pos[0]=X0XXXXXXb choice "One SCSI drive at start" pos[0]=X1XXXXXXb Help "If the BIOS Disk Driver is enabled, one SCSI drive attached to this adapter can be inserted at the head of the BIOS drive chain." NamedItem Prompt "Negotiate Fast and Wide SCSI" choice "Negotiation Enabled" pos[2]=1XXXXXXXb choice "Negotiation Disabled" pos[2]=0XXXXXXXb Help "Negotiation for fast synchronous and wide SCSI data transfers will occur in the BIOS Disk Driver if it is enabled. If disabled, 8-bit asynchronous SCSI transfers will be used." NamedItem Prompt "Host Adapter Board Interrupt Level" choice "INT Level 10" pos[0]=XX01XXXXb INT 10 choice "INT Level 11" pos[0]=XX10XXXXb INT 11 choice "INT Level 14" pos[0]=XX11XXXXb INT 14 choice "INT Level 5" pos[0]=XX00XXXXb INT 5 Help "Set the Host Adapter Interrupt Level so it will have minimal conflict with other interrupting devices." NamedItem Prompt "I/O Address Select" choice "400" pos[1]=00000100b io 00400h-004FFh choice "800" pos[1]=00001000b io 00800h-008FFh choice "900" pos[1]=00001001b io 00900h-009FFh choice "E00" pos[1]=00001110b io 00E00h-00EFFh choice "1400" pos[1]=00010100b io 01400h-014FFh choice "1F00" pos[1]=00011111b io 01F00h-01FFFh choice "6000" pos[1]=01100000b io 06000h-060FFh choice "9000" pos[1]=10010000b io 09000h-090FFh choice "A100" pos[1]=10100001b io 0A100h-0A1FFh choice "A200" pos[1]=10100010b io 0A200h-0A2FFh choice "A300" pos[1]=10100011b io 0A300h-0A3FFh choice "AE00" pos[1]=10101110b io 0AE00h-0AEFFh choice "BF00" pos[1]=10111111b io 0BF00h-0BFFFh choice "C600" pos[1]=11000110b io 0C600h-0C6FFh choice "E000" pos[1]=11100000b io 0E000h-0E0FFh choice "EE00" pos[1]=11101110b io 0EE00h-0EEFFh Help "The adapter may be set up to any one of the I/O Addresses listed. If your selected address conflicts with with an I/O address already assigned, it will be marked with an asterisk and you must select another address." NamedItem Prompt "Memory Address Select" choice "C0000H" pos[2]=X0000XXXb mem 0C0000h-0C3FFFh choice "C4000H" pos[2]=X0010XXXb mem 0C4000h-0C7FFFh choice "C8000H" pos[2]=X0100XXXb mem 0C8000h-0CBFFFh choice "CC000H" pos[2]=X0110XXXb mem 0CC000h-0CFFFFh choice "D0000H" pos[2]=X1000XXXb mem 0D0000h-0D3FFFh choice "D4000H" pos[2]=X1010XXXb mem 0D4000h-0D7FFFh choice "D8000H" pos[2]=X1100XXXb mem 0D8000h-0DBFFFh choice "DC000H" pos[2]=X1110XXXb mem 0DC000h-0DFFFFh Help "Select the desired Channel BIOS ROM size with a starting address that avoids conflict with other adapters. If your selected address conflicts with with a memory address already assigned, it will be marked with an asterisk and you must select another address." NamedItem Prompt "Micro Channel Streaming Support" choice "Streaming Enabled" pos[2]=XXXXXX01b choice "Streaming Disabled" pos[2]=XXXXXX00b Help "You may select whether the board will perform Micro Channel data streaming. If the system does not support data streaming, this option should be DISABLED." NamedItem Prompt "Arbitration Level Select" choice "Arbitration Level 5" pos[3]=XXXX0101b arb 5 choice "Arbitration Level 3" pos[3]=XXXX0011b arb 3 choice "Arbitration Level 2" pos[3]=XXXX0010b arb 2 choice "Arbitration Level 1" pos[3]=XXXX0001b arb 1 choice "Arbitration Level 0" pos[3]=XXXX0000b arb 0 choice "Arbitration Level 6" pos[3]=XXXX0110b arb 6 choice "Arbitration Level 7" pos[3]=XXXX0111b arb 7 choice "Arbitration Level 8" pos[3]=XXXX1000b arb 8 choice "Arbitration Level 9" pos[3]=XXXX1001b arb 9 choice "Arbitration Level 10" pos[3]=XXXX1010b arb 10 choice "Arbitration Level 11" pos[3]=XXXX1011b arb 11 choice "Arbitration Level 12" pos[3]=XXXX1100b arb 12 choice "Arbitration Level 13" pos[3]=XXXX1101b arb 13 choice "Arbitration Level 14" pos[3]=XXXX1110b arb 14 Help "Select the arbitration level of the adapter when it is competing for the system channel. Each arbitration level has a corresponding priority level; the lower the arbitration level, the higher the priority. If your selection conflicts with an arbitration level already assigned in the system, it will be marked with an asterisk and you must select an alternative level." NamedItem Prompt "Host Adapter Board SCSI Device ID" choice "7" pos[0]=XXXX111Xb choice "6" pos[0]=XXXX110Xb choice "5" pos[0]=XXXX101Xb choice "4" pos[0]=XXXX100Xb choice "3" pos[0]=XXXX011Xb choice "2" pos[0]=XXXX010Xb choice "1" pos[0]=XXXX001Xb choice "0" pos[0]=XXXX000Xb Help "Set the Host Adapter SCSI Device ID to avoid conflict with other devices connected to the SCSI bus." NamedItem Prompt "Fairness" choice "Fairness Enabled" pos[3]=1100XXXXb choice "Fairness Disabled" pos[3]=1101XXXXb Help "If 'Fairness' is enabled, the host adapter will not compete for the channel during the next arbitration phase if it is currently in control of the channel. This allows other installed adapters to obtain the channel in the next sequence based on each adapter's assigned priority level. When 'Fairness' is disabled, the adapter will compete for every arbitration phase and will obtain more than its fair share of channel usage. We recommend you use 'Fairness Enabled' for all adapters."