AdapterID 0DF9Fh AdapterName "Integrated Fixed Disk and Controller" NumBytes 3 fixedresources pos[1]=00XXXXXXb int 0eh exec nameditem Prompt "DMA Arbitration Level" Choice "Level 5" pos[0]=XX0101XXb arb 5 Choice "Level 6" pos[0]=XX0110XXb arb 6 Choice "Level 7" pos[0]=XX0111XXb arb 7 Choice "Level 0" pos[0]=XX0000XXb arb 0 Choice "Level 1" pos[0]=XX0001XXb arb 1 Choice "Level 3" pos[0]=XX0011XXb arb 3 Choice "Level 4" pos[0]=XX0100XXb arb 4 Help "This selects the DMA channel the adapter will use to transfer data. Under normal circumstances, select ." nameditem Prompt "DMA Burst Pacing Interval" Choice "24 Microseconds" pos[1]=XX10XXXXb Choice "31 Microseconds" pos[1]=XX11XXXXb Choice "16 Microseconds" pos[1]=XX01XXXXb Choice "Burst Disabled" pos[1]=XX00XXXXb Help "This is the time interval between DMA transfer bursts during which the Micro Channel is released by the fixed disk controller for use by the processor. Under normal circumstances, select <24 Microseconds>." nameditem Prompt "DMA Pacing Control" Choice vcheck "Disabled" pos[2]=1XXXXXXXb Choice vcheck "Enabled" pos[2]=0XXXXXXXb Help "This enables or disables the 'DMA Burst Pacing Interval.' If the 'DMA Burst Pacing Interval' is set to , the DMA Pacing Control will be disabled. Under normal circumstances, select ." nameditem Prompt "Time to Release" Choice vcheck "6 Microseconds" pos[2]=X01XXXXXb Choice vcheck "3 Microseconds" pos[2]=X10XXXXXb Choice vcheck "Immediate" pos[2]=X00XXXXXb Help "This controls the amount of time that the fixed disk controller will keep the Micro Channel after being preempted. If the 'DMA Pacing Control' is set to , the Time to Release will default to immediate. Under normal circumstances, select <6 Microseconds>." nameditem Prompt "Fairness On/Off" Choice "On" pos[0]=X1XXXXXXb Choice "Off" pos[0]=X0XXXXXXb Help "Bus Arbitration Fairness. This controls whether the adapter will release control of the bus when it has been using it exclusively. Under normal circumstances, select ." nameditem Prompt "Primary/Alternate Port Addresses" Choice "Primary" pos[0]=XXXXXX0Xb io 3510h-3517h Choice "Alternate" pos[0]=XXXXXX1Xb io 3518h-351fh Help "Primary/Alternate Port Addresses. This assigns the port addresses used by the adapter. Either or will work equally well. If there are two integrated fixed disks, then select for one and for the other."