AdapterId 0E401h AdapterName "IBM VoiceType Dictation Adapter/A" NumBytes 4 FixedResources POS[3]=XXXXX000b NamedItem Prompt "Address Selection" choice "000800h - 00083Fh" pos[0]=XXXX000Xb io 000800h - 00083Fh choice "002800h - 00283Fh" pos[0]=XXXX001Xb io 002800h - 00283Fh choice "004800h - 00483Fh" pos[0]=XXXX010Xb io 004800h - 00483Fh choice "006800h - 00683Fh" pos[0]=XXXX011Xb io 006800h - 00683Fh choice "008800h - 00883Fh" pos[0]=XXXX100Xb io 008800h - 00883Fh choice "00A800h - 00A83Fh" pos[0]=XXXX101Xb io 00A800h - 00A83Fh choice "00C800h - 00C83Fh" pos[0]=XXXX110Xb io 00C800h - 00C83Fh choice "00E800h - 00E83Fh" pos[0]=XXXX111Xb io 00E800h - 00E83Fh Help "The base address of the IBM VoiceType Dictation Adapter/A can be at one of 8 different locations. Choose a location which does not conflict with any other installed board. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change address selection when you are in the 'Change configuration' window." NamedItem Prompt "Interrupt Selection" choice "Interrupt 10" pos[0]=X100XXXXb int 10d choice "Interrupt 11" pos[0]=X101XXXXb int 11d choice "Interrupt 12" pos[0]=X110XXXXb int 12d Help "The interrupt select chooses which interrupt level the IBM VoiceType Dictation Adapter will use for interrupts. Minimize the amount of interrupt sharing by assigning other installed boards to different levels. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the interrupt level selection if you are in the 'Change configuration' window."