* * PLXX506 APAR = IR39927 V352 OF/2 April 8, 1999 * * This is a replacement diskette for the V352 OF/2. * * PLXX506B allows a session to be established with an ICP which is loaded * with a configuration that is Non_IEF. The Operator is warned that * the IEF MUST BE DISTRIBUTED to the 3172 before the 3172 is * re-IPLed with the IEF Config, then the Operator is asked if he/she * is sure to continue. * * (PLXX506 superceeds & replaces PLXX505B, Includes APAR IR38073.) *--------end of PLXX506--------------------------------------------------- * PLXX505B APAR = IR39022 V352 OF/2 December 14, 1998 * (OF/2 is the Operator Facility configurator for the 3172 ICP code). * * The following changes have been made: * * 1. More than 64 gateway definitions can now be viewed in a Profile. * * 2. Two new menu options have been added to the Utilities menu. * * 1) CREATE CONFIGURATION DISKETTE * -Use when: * a) a configuration is too large to make working diskette 1 * b) the 3172 configuration needs to be updated, but code does not. * -This disk will contain files for configuration & for ipling the 3172. * -NOTE - when creating this diskette, select the appropriate patches * that are applied to the 3172. Although this does not load code to * the 3172, this diskette can be used with the OF/2 option - 'Display * Working Diskettes' - and the code level will appear there. * * USING WITH THE 3172: * -With the configuration diskette in the 3172 diskette drive, * use the keypad command 'CCA enter, CCA enter' to load the * configuration files. When the files have been copied, remove * the diskette and re-ipl the 3172. * * 2) CREATE CODE DISKETTES * -If a configuration is too large to fit on working diskette 1, the * code diskettes can be used along with the configuration diskette * instead of the working diskettes. * -Three code diskettes will be created, similar to working diskettes, * but the configuration files are on the 'configuration diskette'. * -NOTE - the first code diskette cannot be used with the OF/2 option - * 'Display Working Diskettes', use the configuration diskette for this. * * USING WITH THE 3172: * -After the 'CCA enter, CCA enter' command has been executed with the * configuration diskette, REMOVE the diskette. Insert the first code * diskette and execute the keypad commmand 'CCD enter, CCD enter'. * * 3. 'HELP' has been updated with information about the 2 new menu options. * * This is a replacement diskette for the V350 OF/2. * *--------end of PLXX505--------------------------------------------------- * * APAR = IR38073 June 17, 1998 * (OF/2 is the Operator Facility configurator for the 3172 ICP code). * * Year 2000 Compliancy * 1. The system.log can now be viewed with an ending date of * Year 2000 or above. * * 2. The system.log displays the Year 2000 as '00', not '0'. * * This is a replacement diskette for the V350 OF/2. *