|
Common Power
Resurrecting an IBM 8540 PSU AcBel API-9219 Rev.D? (by vincent @ R3TR0.NET) [New!]
Remove a 57 / 77 PSU
Remove a 57 / 77 PSU
This is a little more involved than the 76 PSU, but still simple (after
stripping 54+ 9577 systems, it's all too clear!).
Open the case. Remove the rear bezel by prying the two catches between the
corner of the case and the PSU. Undo the catch on the inside of the rear of the
case (between the PSU and the riser card). The entire rear bezel will now pivot
on two tabs that are on the side opposite the PSU.
Now remove the four screws that hold the PSU in the case. Unplug P1 and P2.
Unplug any drives that are attached to the PSU. Move the cables towards the
front.
Now remember that PS/2s are bloodthirsty. With care, push the PSU out the
rear of the case. I have used my thumbs on the upper rear of the case and my
fingers pulling the top of the PSU rearward.
|