ICALOAD(1,C) AIX Commands Reference ICALOAD(1,C) ------------------------------------------------------------------------------- icaload PURPOSE Downloads tasks to an installed RIC adapter. SYNTAX +------+ icaload ---| |--- ric-number --- file --- task-number ---> +- -v -+ +---------------+ >---| |---| +- load-option -+ Note: This command is for the PS/2 only. DESCRIPTION The icaload command downloads tasks into RIC card memory. The task image is loaded from the file argument and must be either a DOS .COM or .EXE format file. If file is a .COM file, its name must end with ".com". If file is a .EXE file, the name can end in anything but ".com". The ric-number specifies which physical RIC co-processor is to be downloaded. Physical card 0 is the card in the lowest numbered slot in the PS/2. The task is loaded as task-number on the RIC card. By default, the task is started after being loaded into the RIC card. However, you can load a task without starting it by setting load-option to either 1 or L. If the -v option is given, icaload prints a message indicating the starting address of the task in RIC memory. EXAMPLES 1. Load RIC 0 with the RCM. The RCM must be loaded as a task 0 and is called "icaaim.com". icaload 0 /usr/lib/cyclone/icaaim.com 0 2. Load RIC 0 with the RS232 support program as task 1. Do not start the task running. icaload 0 /usr/lib/cyclone/com232.exe 1 1 Processed November 8, 1990 ICALOAD(1,C) 1 ICALOAD(1,C) AIX Commands Reference ICALOAD(1,C) FILES /dev/ric* RELATED INFORMATION See "icareset." Processed November 8, 1990 ICALOAD(1,C) 2