LOCATOR(1,C) AIX Commands Reference LOCATOR(1,C) ------------------------------------------------------------------------------- locator PURPOSE Controls the sample rate of the locator. SYNTAX locator -- -rrate --| Note: This command does not have MBCS support. DESCRIPTION The locator command sets the per-second, rate at which the system checks the cursor position controlled by the mouse. You can specify any of the following for rate: 10, 20, 40, 60, 80, or 100. At system startup, this rate is set at 60. Note: You can run the locator command only from the system console (PS/2 only). FLAG -rrate Sets the sampling rate to the specified value. EXAMPLE To set the locator rate to 40 locator -r40 Processed November 8, 1990 LOCATOR(1,C) 1