This applies to the Raidion Plus/es, Gandiva, and Raidware 4.0 The G6 error message has the following Format: (For Raidware 4.0, instead of G6 error it would be H6) http://www.raidionsystems.com/html/g6_error_message_decode.html G6 Device error at channel aa ID bb: Status xx/yy/zz cc dd eeeeeeee aa - channel number bb - scsi ID of target cc - extended sense key dd - additional sense ee - information bytes xx = Physical I/O completion code: 0x00 = IO_COMPLETED_OK 0x01 = IO_PENDING 0x02 = IO_IN_PROGRESS 0x03 = IO_ABORT_IN_PROGRESS 0x04 = IO_TIME_OUT_IN_PROGRESS 0x05 = IO_C_OK_W_RETRY 0x06 = IO_COMPLETED_WITH_ERROR 0x07 = IO_ABORTED 0x08 = IO_TIME_OUT 0x09 = IO_VIDEO_DOWN 0x0A = IO_ER_UNRECOVERABLE yy = Raidion Plus / Gandiva initiator status: 0x00 = HA_OK 0x01 = HA_ABORT_BY_HOST 0x02 = HA_ABORT_BY_HA 0x03 = HA_SELECTION_TIMEOUT 0x04 = HA_DATA_OVERRUN 0x05 = HA_UNEXPECTED_BUS_FREE 0x06 = HA_INVALID_BUS_PHASE 0x07 = HA_TAG_Q_MESSAGE_REJECT 0x08 = HA_ERROR_UNDEFINED zz = SCSI status byte returned from the target (drive): The valid status bytes defined by SCSI II are: 00 - good 02 - check condition 04 - condition met 08 - busy 10 - intermediate 14 - intermediate - condition met 18 - reservation conflict 22 - command terminated