; Cabletron Systems Inc. ; (c) Copyright Cabletron Systems Inc. 1991, 1992 ; Date: May 21, 1992 ; Rev: 1.00.00 AdapterId 0050h AdapterName "Cabletron 4/16-Mbps Token Ring Adapter" NumBytes 4 nameditem Prompt "Adapter I/O Location" Choice "Segment 0a20" pos[1]=XXXX0100b io 0a20h-0a35h Choice "Segment 1a20" pos[1]=XXXX0101b io 1a20h-1a35h Choice "Segment 2a20" pos[1]=XXXX0110b io 2a20h-2a35h Choice "Segment 3a20" pos[1]=XXXX0111b io 3a20h-3a35h Choice "Segment 0a00" pos[1]=XXXX0000b io 0a00h-0a15h Choice "Segment 1a00" pos[1]=XXXX0001b io 1a00h-1a15h Choice "Segment 2a00" pos[1]=XXXX0010b io 2a00h-2a15h Choice "Segment 3a00" pos[1]=XXXX0011b io 3a00h-3a15h Help "To configure this adapter you must choose the IO location the adapter will use for the NIC and the IO REGisters." nameditem Prompt "DMA Arbitration Level" Choice "Level 5" pos[0]=XXX0101Xb arb 5 Choice "Level 6" pos[0]=XXX0110Xb arb 6 Choice "Level 7" pos[0]=XXX0111Xb arb 7 Choice "Level 8" pos[0]=XXX1000Xb arb 8 Choice "Level 9" pos[0]=XXX1001Xb arb 9 Choice "Level 10" pos[0]=XXX1010Xb arb 10 Choice "Level 11" pos[0]=XXX1011Xb arb 11 Choice "Level 12" pos[0]=XXX1100Xb arb 12 Choice "Level 13" pos[0]=XXX1101Xb arb 13 Choice "Level 14" pos[0]=XXX1110Xb arb 14 Choice "Level 0" pos[0]=XXX0000Xb arb 0 Choice "Level 1" pos[0]=XXX0001Xb arb 1 Choice "Level 2" pos[0]=XXX0010Xb arb 2 Choice "Level 3" pos[0]=XXX0011Xb arb 3 Help "You must choose a DMA Arbitration channel for the adapter to use. A conflict cannot exist with any other device in the system." nameditem Prompt "Adapter Interrupt Level" Choice "Level 3" pos[2]=XXXXXX00b int 3 Choice "Level 7" pos[2]=XXXXXX01b int 7 Choice "Level 9" pos[2]=XXXXXX10b int 9 Choice "Level 12" pos[2]=XXXXXX11b int 12 Help "You must choose the IRQ level the adapter will use to interrupt the system. The IRQ level cannot conflict with any other devices in the system." nameditem Prompt "Adapter Default Port Select" Choice "Shielded TP" pos[1]=1XXXXXXXb Choice "Unshielded TP" pos[1]=0XXXXXXXb Help "You must choose the media port the adapter will use to connect to the Token Ring Network." nameditem Prompt "Adapter Default Port Speed" Choice "4 Megabit/Sec" pos[1]=X1XXXXXXb Choice "16 Megabit/Sec" pos[1]=X0XXXXXXb Help "You must choose the ring speed of the network to which the adapter will be connected."