;ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ;º º ;º Olicom MC 16/4 Token-Ring Network Adapter Revision 1 to 5 º ;º Leaded based version with ONLY STP cable support º ;º Adapter Description File Version 4.00 º ;º Copyright 1992 by Olicom º ;º º ;ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ AdapterID 00A84h AdapterName "Olicom Token-Ring MCA 16/4 Adapter (OC-3129)" NumBytes 4 FixedResources POS[3]=X0XXX000b NamedItem Prompt "I/O Address Location" Choice "0 = 0A20-0A23 & 0A30-0A3F" POS[0]=XX00XXXXb IO 0A20h-0A23h 0A30h-0A3Fh Choice "1 = 0A24-0A27 & 0A40-0A4F" POS[0]=XX01XXXXb IO 0A24h-0A27h 0A40h-0A4Fh Choice "2 = 0A50-0A53 & 0A60-0A6F" POS[0]=XX10XXXXb IO 0A50h-0A53h 0A60h-0A6Fh Choice "3 = 0A54-0A57 & 0A70-0A7F" POS[0]=XX11XXXXb IO 0A54h-0A57h 0A70h-0A7Fh Help "I/O ADDRESS LOCATION: Up to four Token-Ring Network adapters may be installed in this computer. An adapter can use one of four I/O port address combinations. Each combination consists of two address ranges. The selections are, in order of preference, as follows : 0 = 0A20-0A23 & 0A30-0A3F, 1 = 0A24-0A27 & 0A40-0A4F, 2 = 0A50-0A53 & 0A60-0A6F, 3 = 0A54-0A57 & 0A70-0A7F. The assignment for the Token-Ring Network adapter can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the I/O port address must be changed." NamedItem Prompt "Adapter Data Rate" Choice "4 Mbps" POS[3]=XXXX0XXXb Choice "16 Mbps" POS[3]=XXXX1XXXb Help "ADAPTER DATA RATE: This Token-Ring Network adapter can operate at two different data rates, 4 Mbps or 16 Mbps. You MUST set the adapter data rate to the same rate as the Token-Ring Network LAN segment to which you are connecting the adapter. The assignment for this data rate can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "RPL Address location" Choice "RPL Disabled" POS[2]=000110XXb POS[3]=0XXXXXXXb Choice "CC000-CDFFF" POS[2]=100110XXb POS[3]=1XXXXXXXb MEM 0CC000h - 0CDFFFh Choice "CE000-CFFFF" POS[2]=100111XXb POS[3]=1XXXXXXXb MEM 0CE000h - 0CFFFFh Choice "D0000-D1FFF" POS[2]=101000XXb POS[3]=1XXXXXXXb MEM 0D0000h - 0D1FFFh Choice "D2000-D3FFF" POS[2]=101001XXb POS[3]=1XXXXXXXb MEM 0D2000h - 0D3FFFh Choice "D4000-D5FFF" POS[2]=101010XXb POS[3]=1XXXXXXXb MEM 0D4000h - 0D5FFFh Choice "D6000-D7FFF" POS[2]=101011XXb POS[3]=1XXXXXXXb MEM 0D6000h - 0D7FFFh Choice "D8000-D9FFF" POS[2]=101100XXb POS[3]=1XXXXXXXb MEM 0D8000h - 0D9FFFh Choice "DA000-DBFFF" POS[2]=101101XXb POS[3]=1XXXXXXXb MEM 0DA000h - 0DBFFFh Choice "DC000-DDFFF" POS[2]=101110XXb POS[3]=1XXXXXXXb MEM 0DC000h - 0DDFFFh Choice "DE000-DFFFF" POS[2]=101111XXb POS[3]=1XXXXXXXb MEM 0DE000h - 0DFFFFh Choice "C8000-C9FFF" POS[2]=100100XXb POS[3]=1XXXXXXXb MEM 0C8000h - 0C9FFFh Choice "CA000-CBFFF" POS[2]=100101XXb POS[3]=1XXXXXXXb MEM 0CA000h - 0CBFFFh Help "RPL ADDRESS LOCATION: There are 12 possible 8K blocks of PC memory that can be assigned for accessing the RPL area of the Token-Ring Network adapter. The preferred RPL address for the adapter is: CC000-CDFFF. The assignment for this RPL address can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys. The RPL address selected must not be assigned for use by any other adapter or option. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the RPL address must be changed. If a conflict continues to exist, you may have to change the assignments for other adapters or options that are in your computer to resolve the conflict." NamedItem Prompt "Interrupt Level" Choice "Interrupt 2" POS[2]=XXXXXX00b INT 2d Choice "Interrupt 3" POS[2]=XXXXXX01b INT 3d Choice "Interrupt 10" POS[2]=XXXXXX10b INT 10d Choice "Interrupt 11" POS[2]=XXXXXX11b INT 11d Help "INTERRUPT LEVEL: This Token-Ring Network adapter can operate on one of four interrupt levels: 2, 3, 10, or 11. The preferred interrupt level is 2, but the adapter can operate on any of the four levels if necessary. The assignment for this interrupt level can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "Bus Master Arbitration Level" Choice "Level 8" POS[0]=XXXX000Xb ARB 8 Choice "Level 9" POS[0]=XXXX001Xb ARB 9 Choice "Level 10" POS[0]=XXXX010Xb ARB 10 Choice "Level 11" POS[0]=XXXX011Xb ARB 11 Choice "Level 12" POS[0]=XXXX100Xb ARB 12 Choice "Level 13" POS[0]=XXXX101Xb ARB 13 Choice "Level 14" POS[0]=XXXX110Xb ARB 14 Help "ARBITRATION LEVEL: The Bus Master Arbitration level need only be changed if it is in conflict with another adapter. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window."