AdapterId 05126h AdapterName "Tecmar Floppy Tape Controller" NumBytes 2 NamedItem Prompt "Floppy Tape Controller I/O Location" choice "I/O 300" pos[0]=XXXX000Xb io 0300h-0307h choice "I/O 310" pos[0]=XXXX100Xb io 0310h-0317h choice "I/O 320" pos[0]=XXXX010Xb io 0320h-0327h choice "I/O 330" pos[0]=XXXX110Xb io 0330h-0337h choice "I/O 340" pos[0]=XXXX001Xb io 0340h-0347h choice "I/O 350" pos[0]=XXXX101Xb io 0350h-0357h choice "I/O 360" pos[0]=XXXX011Xb io 0360h-0367h choice "I/O 370" pos[0]=XXXX111Xb io 0370h-0377h Help "This port can be assigned to any of eight (8) I/O locations. Use the F5=Previous and the F6=Next keys to change this assignment in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "Floppy Tape Controller Interrupt Number" choice "Int 3" pos[0]=XX00XXXXb int 3 choice "Int 4" pos[0]=XX10XXXXb int 4 choice "Int 5" pos[0]=XX01XXXXb int 5 choice "Int 6" pos[0]=XX11XXXXb int 6 Help "This assignment need only be changed if you do not wish certain programs to share interrupts. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window." NamedItem Prompt "Floppy Tape Controller DMA Arbitration" choice "Level 1" pos[1]=XXXX0001b arb 1 choice "Level 2" pos[1]=XXXX0010b arb 2 choice "Level 3" pos[1]=XXXX0011b arb 3 choice "Level 5" pos[1]=XXXX0101b arb 5 choice "Level 6" pos[1]=XXXX0110b arb 6 choice "Level 7" pos[1]=XXXX0111b arb 7 choice "Level 0" pos[1]=XXXX0000b arb 0 choice "Level 4" pos[1]=XXXX0100b arb 4 Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window."