AdapterId 0616AH ;****************************************************************** ;* * ;* NSS WNIC - general purpose description file. * ;* Update 6-16-92 to set high memory addresses * ;****************************************************************** AdapterName "NSS WNIC/MCA" NumBytes 4 NamedItem Prompt "Base I/O Address" choice "0258H-025FH" pos[0]=xxx0111xb pos[3]=x0000000b io 0258h-025Fh choice "0268H-026FH" pos[0]=xxx0110xb pos[3]=x0000000b io 0268h-026Fh choice "0298H-029FH" pos[0]=xxx0101xb pos[3]=x0000000b io 0298h-029Fh choice "02D8H-02DFH" pos[0]=xxx0100xb pos[3]=x0000000b io 02D8h-02DFh choice "0358H-035FH" pos[0]=xxx0011xb pos[3]=x0000000b io 0358h-035Fh choice "0398H-039FH" pos[0]=xxx0010xb pos[3]=x0000000b io 0398h-039Fh choice "03E8H-03EFH" pos[0]=xxx0001xb pos[3]=x0000000b io 03E8h-03EFh choice "19E8H-19EFH [D80000]" pos[0]=xxx1001xb pos[3]=x0000000b io 19E8h-19EFh mem 0D80000h-0DFFFFFh choice "5698H-569FH [D80000]" pos[0]=xxx1010xb pos[3]=x0000000b io 5698h-569Fh mem 0D80000h-0DFFFFFh choice "8958H-895FH [E00000]" pos[0]=xxx1011xb pos[3]=x0000000b io 8958h-895Fh mem 0E00000h-0E7FFFFh choice "ADD8H-ADDFH [E00000]" pos[0]=xxx1100xb pos[3]=x0000000b io 0ADD8h-0ADDFh mem 0E00000h-0E7FFFFh choice "BA98H-BA9FH [E80000]" pos[0]=xxx1101xb pos[3]=x0000000b io 0BA98h-0BA9Fh mem 0E80000h-0EFFFFFh choice "D068H-D06FH [E80000]" pos[0]=xxx1110xb pos[3]=x0000000b io 0D068h-0D06Fh mem 0E80000h-0EFFFFFh choice "F428H-F42FH [F00000]" pos[0]=xxx1111xb pos[3]=x0000000b io 0F428h-0F42Fh mem 0F00000h-0F7FFFFh choice "DISABLED" pos[0]=xxx0000xb pos[3]=x0000000b Help "The Base I/O Address will be automatically configured as the lowest possible address. If disabled, the WNIC ignores I/O requests and is thus effectively removed from the system. In order to use the high memory addresses (D80000, E00000, E80000, F00000) the port addresses 1298-F428 must be used. This will disable caching in the 8-16MB area."