AdapterId 061E0h AdapterName "NCR Neural Network Board (ID 0x61e0)" NumBytes 2 FIXEDRESOURCES pos[0]=1XXXXXX1b pos[1]=00000000b NamedItem Prompt "Interrupt Enable Select" choice "DISABLE INTERRUPT" pos[0]=X0XXXXXXb choice "ENABLE INTERRUPT" pos[0]=X1XXXXXXb Help "Selecting 'ENABLE INTERUPT' allows the pre-selected IRQ level to be asserted whenever the DSP data flag is active (data available)." NamedItem Prompt "Adapter Board Interrupt Level" choice "INT LEVEL 9" pos[0]=XX11XXXXb INT 9 choice "INT LEVEL 7" pos[0]=XX10XXXXb INT 7 choice "INT LEVEL 5" pos[0]=XX01XXXXb INT 5 choice "INT LEVEL 3" pos[0]=XX00XXXXb INT 3 Help "Set the Board Interrupt Level so it will not conflict with other interrupting devices. Diskettes are usually level 6." NamedItem Prompt "I/O Address Select" choice "340" pos[0]=XXXX010Xb io 00340h-0035Fh choice "240" pos[0]=XXXX001Xb io 00240h-0025Fh choice "400" pos[0]=XXXX011Xb io 00400h-0041Fh choice "420" pos[0]=XXXX100Xb io 00420h-0043Fh choice "3240" pos[0]=XXXX101Xb io 03240h-0325Fh choice "8240" pos[0]=XXXX110Xb io 08240h-0825Fh choice "A240" pos[0]=XXXX111Xb io 0A240h-0A25Fh choice "Disabled" pos[0]=XXXX000Xb Help "This is the I/O Port of the board. Conflicting assignments are marked with an asterisk and must be changed to enable use of the board. (default 340h)"