;PS/2 MCABASE, Mar 2006. AdapterID and AdapterName modified for ID 6416 ;***********************************************************************\ ;* * ;* Adapter Description File (ADF) for Allied Telesis * ;* Copyright (c) 1994 by Allied Telesis, All rights reserved. * ;* * ;* Version: 1.0 Original * ;* * ;* * ;* for AT1720T POS ID = 6410 * ;* for AT1720BT POS ID = 6413 * ;* for AT1720AT POS ID = 6416 * ;* for AT1720FT POS ID = 6419 * ;***********************************************************************/ ; AdapterId 06416h AdapterName "Allied Telesis AT1720AT" NumBytes 3 NamedItem Prompt "Interrupt Request Number" choice "IRQ 3 " pos[1]=00xxxxxxb pos[2]=x0xxxxxxb int 3 choice "IRQ 4 " pos[1]=01xxxxxxb pos[2]=x0xxxxxxb int 4 choice "IRQ 5 " pos[1]=10xxxxxxb pos[2]=x0xxxxxxb int 5 choice "IRQ 9 " pos[1]=11xxxxxxb pos[2]=x0xxxxxxb int 9 choice "IRQ 10 " pos[1]=00xxxxxxb pos[2]=x1xxxxxxb int 10 choice "IRQ 11 " pos[1]=01xxxxxxb pos[2]=x1xxxxxxb int 11 choice "IRQ 12 " pos[1]=10xxxxxxb pos[2]=x1xxxxxxb int 12 choice "IRQ 15 " pos[1]=11xxxxxxb pos[2]=x1xxxxxxb int 15 Help "Select the interrupt (IRQ) number to be used by the AT-1720 Adapter. If a conflict with another device exists, use the F5=Previous and F6=Next keys to change IRQ assignments (conflicts are indicated with an asterisk)." NamedItem Prompt "Boot ROM Memory Address" choice "Disabled" pos[1]=xx111xxxb choice "C4000" pos[1]=xx000xxxb mem 0c4000h-0c7ffffh choice "C8000" pos[1]=xx001xxxb mem 0c8000h-0cbffffh choice "CC000" pos[1]=xx010xxxb mem 0cc000h-0cfffffh choice "D0000" pos[1]=xx011xxxb mem 0d0000h-0d3ffffh choice "D4000" pos[1]=xx100xxxb mem 0d4000h-0d7ffffh choice "D8000" pos[1]=xx101xxxb mem 0d8000h-0dbffffh choice "DC000" pos[1]=xx110xxxb mem 0dc000h-0dfffffh Help "If your AT-1720 contains a boot ROM, select the desired starting memory address for the ROM. If no boot ROM is installed, select the 'Disabled' choice. Use the F5=Previous and F6=Next keys to alter the selection." NamedItem Prompt "I/O Port Addresses" choice "0x0400-0x04FF" pos[1]=xxxxx000b io 0400h-04FFh choice "0x1400-0x14FF" pos[1]=xxxxx100b io 1400h-14FFh choice "0x2400-0x24FF" pos[1]=xxxxx001b io 2400h-24FFh choice "0x3400-0x34FF" pos[1]=xxxxx101b io 3400h-34FFh choice "0x4400-0x44FF" pos[1]=xxxxx010b io 4400h-44FFh choice "0x5400-0x54FF" pos[1]=xxxxx110b io 5400h-54FFh choice "0x6400-0x64FF" pos[1]=xxxxx011b io 6400h-64FFh choice "0x7400-0x74FF" pos[1]=xxxxx111b io 7400h-74FFh Help "Select the desired address range for the AT-1720's I/O ports. Use the F5=Previous and F6=Next keys to alter the selection." NamedItem Prompt "Port Selection" choice "Auto Select" pos[2]=xx00xx1xb choice "Twisted Pair" pos[2]=xx01xx0xb choice "BNC" pos[2]=xx11xx1xb Help "Select the desired port to be used by the AT-1720 adapter. 'Twisted Pair' selects the 10BaseT (UTP/RJ45) port. 'BNC' selects the 10Base2 (Thin Ethernet) port. 'Auto Select' causes the AT-1720BT to automatically use the UTP port when a Twisted Pair cable is connected, or to use the BNC port if no cable if connected to the UTP port." NamedItem Prompt "Twisted Pair Type" choice "100ohm UTP/STP" pos[2]=xxxx01xxb choice "150ohm STP" pos[2]=xxxx10xxb Help "Select the type of cabling to be used whenever the Twisted Pair port is active. This option has no effect when the BNC port is active."