AdapterID 06AE0h AdapterName "SCSI Fixed Disk Controller" NumBytes 4 fixedresources pos[2]=00000000b int 14 nameditem Prompt "Adapter I/O Location" Choice "Adr I/O 400h" pos[1]=01000000b io 0400h-040fh Choice "Adr I/O 500h" pos[1]=01010000b io 0500h-050fh Choice "Adr I/O 600h" pos[1]=01100000b io 0600h-060fh Choice "Adr I/O 700h" pos[1]=01110000b io 0700h-070fh Choice "Adr I/O 800h" pos[1]=10000000b io 0800h-080fh Choice "Adr I/O 900h" pos[1]=10010000b io 0900h-090fh Help "To configure this adapter you must choose the I/O location the adapter will use . Under normal circumstances, select < Adr I/O 400h>." nameditem Prompt "DMA Arbitration Level" Choice "Level 3" pos[0]=XXX0011Xb arb 3 Choice "Level 4" pos[0]=XXX0100Xb arb 4 Choice "Level 0" pos[0]=XXX0000Xb arb 0 Choice "Level 1" pos[0]=XXX0001Xb arb 1 Choice "Level 5" pos[0]=XXX0101Xb arb 5 Choice "Level 6" pos[0]=XXX0110Xb arb 6 Choice "Level 7" pos[0]=XXX0111Xb arb 7 Choice " No DMA " pos[0]=XXX1111Xb Help "This selects the DMA channel the adapter will use to transfer data. Under normal circumstances, select option ... WARNING : The option means Programmed I/O in Burst mode and depends on the HARDWARE : (SCSI disk capability transfer rate and CPU speed), DESTRUCTIVE errors may appear if this selection is not appropriate !!" nameditem Prompt "Fairness On/Off" Choice "On" pos[3]=XXX0XXXXb Choice "Off" pos[3]=XXX1XXXXb Help "Bus Arbitration Fairness. This controls whether the adapter will release control of the bus when it has been using it exclusively. Under normal circumstances, select ."