AdapterId 06dedh AdapterName "U.S. Robotics Courier 2400 eps" NumBytes 1 NamedItem Prompt "Serial(COM) Address" choice "SERIAL_1" pos[0]=XXXX000Xb io 03f8h-03ffh int 4 choice "SERIAL_2" pos[0]=XXXX001Xb io 02f8h-02ffh int 3 choice "SERIAL_3" pos[0]=XXXX010Xb io 3220h-3227h int 3 choice "SERIAL_4" pos[0]=XXXX011Xb io 3228h-322fh int 3 choice "SERIAL_5" pos[0]=XXXX100Xb io 4220h-4227h int 3 choice "SERIAL_6" pos[0]=XXXX101Xb io 4228h-422fh int 3 choice "SERIAL_7" pos[0]=XXXX110Xb io 5220h-5227h int 3 choice "SERIAL_8" pos[0]=XXXX111Xb io 5228h-522fh int 3 Help "The Courier 2400eps can be assigned to use Serial 1 through Serial 8. Use the F5=Previous and the F6=Next keys to change serial port assignments. Conflicting assignments are marked with an asterisk. Conflicts must be resolved to use the adapter." NamedItem Prompt "Smart/Dumb" choice "SMART COMMANDS ENABLED" pos[0]=xxx0xxxxb choice "DUMB MODEM W/ AUTO ANS" pos[0]=xxx1xxxxb Help "Use this setting to enable or disable the modem's command set. When set to 'DUMB', the modem cannot originate calls, but will answer the phone. This could be useful for applications needing restricted access to the phone lines. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Power-up Defaults" choice "BOOT STORED DEFAULTS FROM NVRAM" pos[0]=xx1xxxxxb choice "BOOT FACTORY SETTINGS FROM PROM" pos[0]=xx0xxxxxb Help "Use this setting to specify whether the modem uses its internal non-volatile memory to initialize its settings on power-up. Using the FACTORY SETTINGS choice assures that the modem is always initialized to known settings, regardless of previous use. Toggle between the choices with the F5=Previous or F6=Next keys."