$ EDSYSCSI F`p `. Cached SCSI I/O Adapter(s) tests passed. p' SCSI I/O Adapter(s) tests passed. `$ 0 Cached SCSI I/O Adapter(s) p$ 0 SCSI I/O Adapter(s) p( Testing SCSI I/O Adapter in Slot 0 p p ppppppppp p- TEST SCSI ADAPTER(S): pK This selection will test the SCSI adapters in all the slots. pK This selection will test the SCSI adapter that resides in this slot. 2pl Error during Card Reset Test. Failure Id = 0000. Test Number = 00. Please replace SCSI I/O Adapter. 3p] Error during System Register Test. Failure Id = 0000. Please replace SCSI I/O Adapter. 4pX Error during Cache Data Test. Failure Id = 0000. Please replace SCSI I/O Adapter. 5p[ Error during Cache Address Test. Failure Id = 0000. Please replace SCSI I/O Adapter. 6p[ Error sending Immediate Command. Failure Id = 0000. Please replace SCSI I/O Adapter. 7pa Error sending Subsystem Control Block. Failure Id = 0000. Please replace SCSI I/O Adapter. 8pV Error during BIOS ROM Test. Failure Id = 0000. Please replace SCSI I/O Adapter. 9pSCSI Bus Failure. Failure Id = 0000. Test Number = 00. Make sure cables, devices, and terminator are properly installed and re-run test. If test still fails, remove cables, terminate card, and re-run test. If test still fails, replace SCSI Adapter. :pm Error during SCSI Timing Test. Failure Id = 0000. Test Number = 00. Please replace SCSI I/O Adapter. ;p] No SCSI I/O Adapter could be detected in this system. Please replace SCSI I/O Adapter.