|
@80B7.ADF - Radius SVGA MultiView
Radius SVGA Utilities Disk courtesy of Mike Armstrong
Radius SVGA Drivers Disk (Win3.1/ACAD/Lotus)
Radius SVGA ROM Image (U18/U19 - 27C256)
Note: I'm not sure if this is correct, the
original page
had two images named U18 and U19 but the contents were the same!
SVGA MultiView MC
ADF Sections
SVGA MultiView MC
![[P]](/other/img/photo.gif "Front")
J2 HDD15 video Connector
J4 VESA Media Connector
JP1 3-pin header (ROM Bank?)
SW1 Monitor switch
U5 SC11484CV RAMDAC
|
U6 Headland HT209/D
U18,19 BIOS ROMs
U20 Radius 297-0580-A
U27 14.318 xtal
U51-58 Toshiba TC524256BJ-80
|
JP1 Possibly chooses between two
BIOS ROM banks?
SW1 It says:
2 ON - FULL PAGE DISPLAY
2 OFF - MULTISYNC MONITOR
I assume this might mean BOTH on or off.
(Ed. or just switch #2?)
U18,19 *both* are marked SVGA
Multiview MC, V2.02 256K, -0050-02 A
U5 Sierra Semiconductor Mark2 SC11484
(15bit, 6/8bit DAC, overlay)
ADF Sections 080B7h "Radius SVGA MultiView"
FastWrite Setting
The FastWrite cache is used to reduce memory wait states
to virtually zero on all memory writes.
<"FastWrite
Enabled">, FastWrite Disabled
Pure Mode Setting
Pure Mode is used to emulate a pure IBM VGA with no extensions.
To enable access to Radius extensions, Pure Mode must be disabled.
<"Extensions
Enabled">, Extensions Disabled
| ![[P]](https://vgamuseum.ru/wp-content/gallery/radius-svga-multiview/radius_svga_multiview_f.jpg "Front"){kind=small}
![[P]](https://vgamuseum.ru/wp-content/gallery/radius-svga-multiview/radius_svga_multiview_r.jpg "Back"){kind=small}